Static Grass Applicator

This Product Does Not Come With A Battery.
Flocking Static Grass Applicator
Method Of Application & Matters Need Attention
1. Load the battery before use and check whether the wires in the container have contact with the metal mesh, which is the key inspection step;
2. Put in the grass powder. It is suggested that the length of the grass powder is more than 5mm, which is more effective.Then tighten the lid.
3. In the target model and on the ground table, white latex is drawn and applied evenly, ready to start sprinkling grass powder;
4. Touch the surface of the target platform with the negative electrode electrical connector, as close as possible, and then use the grass planter to start spraying the grass powder 2-3cm away from the target platform.
5. After the grass powder is finished, pour out the extra grass powder or use a model vacuum cleaner to suck it up.
6. Trim the haystack with small scissors and a toothpick until it grows evenly.
Notice
- Do not use the negative terminal to contact the metal mesh, there will be electric spark causing danger!
- Limit the use age above 16 years old!Remove the battery when not in use and place it high.
This product does not contain batteries (Because the battery is an embargo, buyer is required to prepare 2 size AA batteries.)
Static Grass Applicator original screen is suitable for 3-5mmstatic Grass.
Large Size sieve is suitable for 8-12mm static Grass,needs to be purchased separately.
 
This product is designed in China